AridDek Aluminum Decking in Kansas City

AridDek uses interlocking aluminum boards with channels that direct rainwater toward the drain edge. It’s worth considering for an elevated deck in Kansas City if you want to use the patio or storage below. The layout needs to account for where the water will discharge.
Show moreAridDek is especially useful when you want a sheltered patio, a drier outdoor storage area, or an entry protected from water draining through the deck. Start by deciding where runoff should go and how you’ll use the space below. Compare all decking materials with Tuff Deck Builders Kansas City.
Show lessContact Us
How AridDek Directs Rainwater
AridDek uses tongue-and-groove aluminum boards to create the walking surface and manage rainwater. Most water flows down the sloped surface. Any water that passes the joints is collected by channels built into the boards and carried to the drainage edge.
Show moreOne deck surface, two usable levels
An elevated AridDek deck can create space below for seating, a walkway, or outdoor storage. The drainage edge and wall connection determine how well that area stays sheltered in a storm.
If the deck sits above finished indoor space, confirm the complete assembly is suitable for that application with the project designer and the manufacturer.
Visit our decking materials page to compare the surfaces available for your project.
Meet our Kansas City deck team and learn how we plan projects around your home, yard, and priorities.
Show less
Contact Us
AridDek Design Options
Wahoo Building Products lists Granite, Sandstone, and Artisan Clay for AridDek. The powder-coated boards have a lightly ribbed surface, and each color gives the deck a different look alongside siding, masonry, and railings.
Show moreWhere AridDek fits
The system can be considered for elevated decks, balconies, and some waterfront applications. Think through railing placement and how you’ll use the protected space below before settling on a finish and board layout.
Compare samples at the house
Look at the finish in direct sun and afternoon shade. Check how it reads next to the railing and fascia, especially on an upper deck that is visible from the yard.
Ask which matching trim pieces are available for the board edges and stair transitions. A sample can also help you judge the texture if you spend a lot of time barefoot outdoors.
Browse our deck and outdoor living projects for ideas on board colors, railings, stairs, and layouts.
Show less
Contact Us
AridDek Decking Services
Whether you’re building an elevated deck or replacing a worn surface, plan the AridDek boards, railings, stairs, and drainage together. Start with how you want to use the space below and where the collected water can leave the deck.
Show morePlan the runoff before the railings
- Choose an outlet that keeps runoff away from stairs, doors, and frequently used paths.
- Coordinate railing attachments, fascia, and trim with the board layout.
- Decide early whether you want lights, fans, or a finished ceiling beneath the deck, and plan access for future maintenance.
Wind can still drive rain through the open sides of a patio. Use its orientation and typical storm exposure to decide where seating and storage belong.
Explore our deck services if the project also involves replacing the frame or reworking stairs and landings.
Show less
Contact Us
Our AridDek Installation Process
A site assessment determines whether an existing frame can support AridDek and be pitched correctly. The frame still carries the structural loads, so joists, beams, posts, and the house connection all need to be checked before resurfacing.
Show moreCheck the frame and set the drainage direction
Wahoo recommends at least ⅛ inch of pitch per foot for AridDek. The installer checks that the deck can achieve that slope while meeting the required door clearance and support details.
- Assess the structure and how you’ll use both levels.
- Choose the finish, board direction, and drainage outlet.
- Prepare the framing and coordinate the deck edges and railing.
- Install the boards and check the runoff path.
The installation brings together the boards, fasteners, edge trim, and drainage components. Ask how the installer will check the water path and make it accessible for future cleaning.
Use our deck design tool to organize layout ideas before discussing the framing and installation scope.
Show less
Contact Us
AridDek Performance in Kansas City’s Rain and Summer Heat
Seasonal storms and winter freeze-thaw cycles in Kansas City make drainage planning as important as the decking surface. AridDek carries water toward the low edge, and a well-placed outlet helps keep runoff away from a lower patio and the ground beside your home.
Show moreDownpours, tree cover, and humid weather
Clear leaves from the collection edge and gutter so water can escape after storms. Allow airflow around the framing, especially when adding a ceiling below, so damp wood can dry.
Sun, frost, and seasonal movement
Aluminum can heat up in direct afternoon sun. If the deck gets sustained sun, evaluate the finish and layout in person and plan shade where you sit. During installation, account for temperature changes at board ends and trim. Clear loose debris and take care when frost or ice covers the walking surface.
See our Kansas City service areas across the Missouri and Kansas metro.
Show less
Contact Us
Start Planning Your AridDek Deck
A useful estimate covers the deck surface and the path rainwater will take after it leaves the boards. Share what you want the deck and the area below it to do, along with any drainage problems you already see. Request a free deck estimate to discuss your options.
Show moreWhat to share with Tuff Deck Builders Kansas City
- Approximate dimensions, deck height, and photos taken above and below the frame.
- Locations of doors, stairs, railings, and the proposed runoff outlet.
- Whether the project involves resurfacing, a new frame, or a sheltered patio below.
Ask the estimate to identify framing work, boards and trim, drainage components, and any railing or stair work as separate line items.
Contact Tuff Deck Builders Kansas City to share the deck layout and discuss where you want the water to go.
If you want to explore payment options, our deck financing page explains how to get started. Financing may be available for qualified homeowners.
Show less
Contact Us
Frequently Asked Questions
How do I choose a contractor for an AridDek deck in Kansas City?
Choose a contractor who can show completed waterproof aluminum decks and explain where the runoff goes. Ask to see the wall, railing, and drainage-edge details on a previous project, and request written scopes for the deck and gutter work.
Can I use my existing Kansas City deck frame for AridDek?
You may be able to reuse the frame if it’s sound and can support the required pitch and board layout. An inspection should cover the posts, beams, joists, house connection, and any concealed rot before an estimate assumes resurfacing.
What should I compare in two Kansas City AridDek estimates?
Compare the full scope for both estimates, including demolition, repairs, aluminum boards, trim, gutter, and the runoff outlet. Check whether stairs and railings are included and ask who handles any work needed at the house connection.
Is AridDek a good choice for a Kansas City patio under an upstairs deck?
AridDek is a good candidate when you want the deck surface to channel water away from the patio below. Its usefulness depends on pitch, the house connection, and the outlet location, particularly if wind drives rain into the open sides.
Where should the water drain on a steep Kansas City lot?
Direct runoff to a stable outlet away from the house, steps, and the lower patio. Have the contractor look at the slope and existing stormwater paths, then decide whether a gutter and downspout can carry water to a suitable discharge point.
Will AridDek be comfortable barefoot in Kansas City summer sun?
AridDek can get hot in direct sun, especially on an exposed afternoon deck. Compare physical color samples outdoors and plan shade over seating or a heavily used doorway if barefoot comfort is a priority.
Can I add lighting or a fan below an AridDek deck?
Yes, you can plan lighting or a fan beneath the deck. Coordinate fixtures, wiring, ceiling access, and attachment points with the framing and drainage layout before installation. Have the electrical work handled by a qualified professional.
How do I clean an AridDek deck after a storm?
Sweep away debris, clear the gutter and outlet, and wash the powder-coated surface with soap and water as needed. Pay attention to leaves at the low edge and avoid leaving wet, rust-prone steel objects on the boards.
Do I need a gutter with AridDek on my Kansas City deck?
A gutter is optional, but it helps when water would otherwise fall on a path, patio, or planting bed. Ask the contractor to show where water will leave the boards so you can judge whether a gutter is worthwhile.
What should I send when I request an AridDek quote in Kansas City?
Send dimensions, photos of the deck and the structure beneath it, and a short description of your plans. Identify doors, stair locations, the area you want to shelter, and any places where water currently pools or runs downhill.
